Article Insight:
- Reset the Panasonic TV remote by taking out the batteries, pressing the Power button for 10-20 seconds, and reinserting the batteries.
- To reset remotes of Panasonic TVs with Roku, Fire & Google OS, just disconnect and re-pair the remote with your TV.
If you are not familiar with resetting your problematic Panasonic TV remote, follow this article. Here, you’ll be guided through the procedure to reset Panasonic TV remotes of all the available models and get rid of all the troubles it causes.
How to Reset Panasonic Roku TV Remote
You can reset your Roku remote by power cycling and re-pairing it with the TV. To do this, follow the below steps.
1. Unplug your Panasonic Roku TV from the power socket and take out the batteries from the remote.
2. Wait for about 1 minute & plug the TV into the power socket again. Also, reinsert the batteries of the remote.
3. Now, turn on your Panasonic TV and press the Pairing button located in the battery compartment until the LED light next to it starts blinking.
FYI: If your remote doesn’t have the pairing button, press the Home and Back buttons until the LED indicator starts flashing.
4. Once you see a successful pairing message on your TV screen, the reset has been completed, and your remote is restored to its factory settings.
How to Reset Panasonic Fire TV Remote
1. Disconnect your Panasonic Fire TV from the power outlet. After 1 minute, press the Left, Menu, Back buttons on the remote simultaneously for 12 seconds and release them.
2. After 5 seconds, connect your TV to the power socket and turn it on. Then, remove your remote batteries.
3. Once the screen says “the remote can’t be detected,” reinsert the batteries and press the Home button.
4. A blue LED light on the remote will indicate that the remote is reset and paired to your TV again.
Notice! If the blue light does not appear on your remote, press and hold the Home button for 10 seconds.
How to Reset Panasonic Google TV Remote
1. Remove the batteries from the Panasonic Google TV remote and reinsert them after a few seconds while pressing the Home button.
2. Keep holding the Home button until the LED light on the remote begins to blink. Then, release the button to complete the reset.
How to Reset Panasonic TV Remote (All TV Models)
This is a reset method you can use for all remotes, including Panasonic Viera TV and Android TV.
1. Take off the batteries from the remote and unplug the Panasonic TV from the power outlet.
2. Press the Power button for about 10-20 seconds to drain any residual power on the remote.
3. Plug your Panasonic TV back into the power outlet and reinsert the remote’s batteries. Now, turn on the TV to check if the remote is working normally.
With the above guidelines, you can now reset and fix malfunctions on your Panasonic TV remote control instead of smacking & damaging the remote. If your remote is not working & the TV isn’t responding even after this process, try using the Panasonic TV remote app or a compatible universal remote.
FAQ
1. Why is the Panasonic TV remote sensor not working?
Your remote sensor might not work due to a number of reasons. Check if you need to change the remote batteries, and ensure there is no physical damage on the remote. If the sensor is still not working, you will have to repair or replace the remote.
